High Strength Low Alloy Steel

High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties than conventional carbon steels.  They are designed to meet specific mechanical properties rather than a chemical composition.  The chemical composition of a specific HSLA steel may vary for different product thickness to meet mechanical property requirements.  The HSLA steels have low carbon contents (0.50 to ~0.25 weight percent C) in order to produce adequate formability and weldability, and they have manganese contents up to 2.0 weight percent.  Small quantities of chromium, nickel, molybdenum, copper, nitrogen, vanadium, niobium, titanium, and zirconium are used in various combinations.

They have improved Mechanical properties, greater resistance to atmospheric corrosion. This is a specific group of steels in which moderate proportions of some alloying elements are proportionally added to enhance mechanical properties and to improve resistance to atmospheric corrosion.

Classification of High Strength Low Alloy Steel:

• Weathering steels, designated to exhibit superior atmospheric corrosion resistance
• Control-rolled steels, hot rolled according to a predetermined rolling schedule, designed to develop a highly deformed austenite structure that will transform to a very fine equiaxed ferrite structure on cooling
• Pearlite-reduced steels, strengthened by very fine-grain ferrite and precipitation hardening but with low carbon content and therefore little or no pearlite in the microstructure
• Microalloyed steels, with very small additions of such elements as niobium, vanadium, and/or titanium for refinement of grain size and/or precipitation hardening
• Acicular ferrite steel, very low carbon steels with sufficient hardenability to transform on cooling to a very fine high-strength acicular ferrite structure rather than the usual polygonal ferrite structure
• Dual-phase steels, processed to a micro-structure of ferrite containing small uniformly distributed regions of high-carbon martensite, resulting in a product with low yield strength and a high rate of work hardening, thus providing a high-strength steel of superior formability.